Can I Connect Two BT Smart Hubs Together?

How fast is BT Smart Hub?

Hardware-wise, the BT Smart Hub has seven antennas—good for 3×3 MIMO at 2.4GHz (max throughput ~200Mbps) and 4×4 MIMO at 5GHz (max throughput ~1700Mbps).

There are four gigabit Ethernet ports and a single USB 2.0 port (USB 3.0 was passed over due to “higher levels of interference,” BT told Ars)..

How do you connect and have two separate networks with 1 modem and 2 routers?

What I would do is get a simple 5-port switch, and run that off of the modem directly. Then off the switch, add the two routers, each plugged into the WAN port. This will make them completely independent of each other, and both access the Internet.

Can I use a second BT Home Hub as a range extender?

The HH5 can be used as a wireless repeater and has to be connected to the router via an ethernet cable, connect the 2nd hub to your pc via the ethernet port, access BT Home Hub Manager on the iP address of 192.168. 0.154 in the DHCP server settings change eneable from yes to no then apply.

Can you use a BT Smart Hub as a repeater?

Wi-Fi is Great! In essence, there are three main parts to using an old router as an extender, you also don’t need to use a BT Hub specifically, this method will work with virtually any router on the market! …

Can I use my old router as a repeater?

Any router that DD-WRT can be installed on can be turned into a wireless repeater and bridge. … It’s used for range extension: the repeater takes the signals from your primary wireless network and repeats them on its own network. In addition, the router can serve as a bridge.

Can I use a second hand BT Home Hub?

Re: Can I use my bt hub 6 at a different house? As long as it is a BT line. Logins are generic, any home hub can be used on any BT line.

What does BT do with old hubs?

Re: Do BT want old Home Hubs back? If BT replace a hub for you then they will send a packet to return the old one for recycling. If you don’t want to then you don’t need to.

Who is connected to my BT Home Hub?

You can check which devices are connected to your BT Home Hub 4, Hub 5, BT Smart Hub or Ultrafast Smart Hub by looking at the Home Network map in the Hub Manager. This shows all currently connected devices including those connected to the 2.4GHz and 5Ghz wireless bands.

How many devices can I have on BT?

You can register up to four* devices, and watch programmes on two devices at the same time. When you’ve reached your device limit, you can register a new device once every thirty days.

Is having 2 routers bad?

No, two routers will not cause problems. … No, two routers will not cause problems. If they are on the same (or close) channels, it may cause some slowdowns in performance tho, it’s best to get them on channels at least 6 apart, so no part of the bands overlap.

Can you connect 2 routers to 1 phone line?

Typical home routers are likely to combine both router and modem functions. You can’t connect two separate modems to the same phone line, but you could instead slave one of the routers to the other. This may be as simple as connecting an Ethernet cable between any two ports of the two boxes.

Will adding a second router increase speed?

Will Adding a Router Increase Speed? Network bandwidth is much the same as a plumbing system. … If your Wi-Fi is slow, adding a second router can improve data flow if your Wi-Fi was slow, but it won’t help if your internet service was slow too. There are three components to a Wi-Fi network that all work together.

Can you connect two hubs together?

If your network is small, you can always connect two hubs or switches together. You do this by one of two ways: 1) Use a “crossover” cable to connect a “Normal” port on one hub to a “Normal” port on the other.

How many devices can connect to BT Hub?

The key quote from BT support is ‘the home hubs are not meant to be connected to more than 4-5 devices, I am afraid’. So, if you’ve a couple of smartphones, a Sky box and a laptop connected, you’re maxxing it out, so expect unreliability.

How do I connect two routers together?

Set the Internet Gateway of router 2 to router 1’s IP address. Connect the two routers using a wired connection from any of port 1-4 in router 1 to any of port 1-4 in router 2. You can use a Wireless Media Bridge or Powerline Ethernet Kit to create a wired connection. DO NOT use router 2’s WAN port.

Can I use BT Home Hub 6 with another ISP?

Technically speaking, the Home Hub 5 is locked to BT accounts, including ADSL, Infinity and those connections provided by its subsidiary Plusnet. However, there’s no reason why you can’t still use the Home Hub 5 as a brilliantly-fast access point, making full use of its Gigabit Ethernet switch in the process.

Can I use my old BT router as a WiFi extender?

Re: Re-purposing an old Home-Hub 2.0 router as a wi-fi extender. Just give the hub you are going to use an extender an IP address outside of the DHCP range of the main hub, disable DHCP on it and connect it to the main hub via Ethernet cable LAN port to LAN port.