- What is a 192.168 IP address?
- What does IP address 0.0 0.0 mean?
- Is 192.168 private or public?
- Is 169 a private IP address?
- What are the three ranges of IP addresses that are reserved for internal private use choose three?
- What are the reserved private IP address ranges?
- What is the characteristics of multicast messages?
- What are two types of IPv6 Unicast addresses?
- What are the three ranges of IP addresses?
- What are three characteristics of multicast transmission?
- How do I know if my IP is public or private?
- Why is 192.168 always used?
- Which switching method drops frames that fail the FCS check?
- What are special IP addresses?
- Who assigns private IP addresses?
- What are the components of an IP address?
- What are the two reserved IP addresses?
- How do I make my IP private?
What is a 192.168 IP address?
1.1 is a common factory IP address for a consumer-grade router.
If the router is used for connecting to the Internet then all computers and devices which access the Internet through it will use this address as their default gateway..
What does IP address 0.0 0.0 mean?
From Wikipedia, the free encyclopedia. In the Internet Protocol Version 4, the address 0.0. 0.0 is a non-routable meta-address used to designate an invalid, unknown or non-applicable target. This address is assigned specific meanings in a number of contexts, such as on clients or on servers.
Is 192.168 private or public?
192.168. Note that only a portion of the “172” and the “192” address ranges are designated for private use. The remaining addresses are considered “public,” and thus are routable on the global Internet.
Is 169 a private IP address?
The 169 IP range of addresses is reserved by Microsoft for private network addressing, so if your computer is set to obtain an IP automatically, then you’ll get one.
What are the three ranges of IP addresses that are reserved for internal private use choose three?
What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.)10.0.0.0/126.96.36.199.0/188.8.131.52.0/184.108.40.206.0/220.127.116.11.0/18.104.22.168.0/16. Explanation: The private IP address blocks that are used inside companies are as follows: 10.0.
What are the reserved private IP address ranges?
The organizations that distribute IP addresses to the world reserves a range of IP addresses for private networks.192.168.0.0 – 192.168.255.255 (65,536 IP addresses)172.16.0.0 – 172.31.255.255 (1,048,576 IP addresses)10.0.0.0 – 10.255.255.255 (16,777,216 IP addresses)
What is the characteristics of multicast messages?
They are sent to a select group of hosts. They are sent to all hosts on a network. They must be acknowledged.
What are two types of IPv6 Unicast addresses?
What are two types of IPv6 unicast addresses? (Choose two.)multicast.loopback.link-local.anycast.broadcast. Explanation:Multicast, anycast, and unicast are types of IPv6 addresses. There is no broadcast address in IPv6. Loopback and link-local are specific types of unicast addresses.
What are the three ranges of IP addresses?
There are three ranges of addresses that can be used in a private network:10.0. 0.0 – 10.255. 255.255.172.16. 0.0 – 172.31. 255.255.192.168. 0.0 – 192.168. 255.255.
What are three characteristics of multicast transmission?
What are three characteristics of multicast transmission? (Choose three.)The source address of a multicast transmission is in the range of 224.0. … A single packet can be sent to a group of hosts.Multicast transmission can be used by routers to exchange routing information.More items…•
How do I know if my IP is public or private?
Public IP address are the IP addresses which have to registered before use. IANA is responsible for register these IP addresses to the organizations. Private IP address are the IP addresses which are reserved by IANA and they are not routable in the internet. These addresses will be not assigned to any organizations.
Why is 192.168 always used?
Long story short, we are using 192.168. X.X IP addresses because this is best practice. The IETF has created three IP ranges for private networks, with Class C being the smallest and easiest to control and maintain. This is why most routers use exactly this IP range.
Which switching method drops frames that fail the FCS check?
The FCS check is used with store-and-forward switching to drop any frame with a FCS that does not match the FCS calculation that is made by a switch. Cut-through switching does not perform any error checking. Borderless switching is a network architecture, not a switching method.
What are special IP addresses?
Special Use IP addresses There are a number of addresses that are set aside for special purposes, such as the IP’s used in OSPF, Multicast, and experimental purposes that cannot be used on the Internet.
Who assigns private IP addresses?
Which IP Addresses Are Private? The Internet Assigned Numbers Authority (IANA) reserves the following IP address blocks for use as private IP addresses: 10.0. 0.0 to 10.255.
What are the components of an IP address?
For this purpose, an IP address is recognized as consisting of two parts: the network prefix in the high-order bits and the remaining bits called the rest field, host identifier, or interface identifier (IPv6), used for host numbering within a network.
What are the two reserved IP addresses?
IPv4Address blockAddress rangeNumber of addresses127.0.0.0/8127.0.0.0–127.255.255.25516777216169.254.0.0/16169.254.0.0–169.254.255.25565536172.16.0.0/12172.16.0.0–172.31.255.2551048576192.0.0.0/24192.0.0.0–22.214.171.12425612 more rows
How do I make my IP private?
Use a VPN to hide your IP address. A VPN, or Virtual Private Network is a software service that encrypts all of the data sent to and from the internet and routes it through a VPN server in another location.