Quick Answer: Does It Matter What Slots I Put My Ram In?

Can I put ddr4 RAM in any slot?

No, it is not electrically nor electronically compatible.

DDR4, for example, runs at 1.2V (volts) while DDR3 runs at 1.5V (or 1.35V for DDR3L).

A DDR3 RAM slot will provide that voltage..

Can I put my ram in any slot?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

Can I add 8gb RAM to 4gb laptop?

In technical aspect, a 8GB RAM stick can be added to a computer 4GB RAM as long as both of 8GB and 4GB have the same speed front side bus speed. For better performance, the both of RAM sticks should have also same size not only same speed. It means that, the second RAM stick should be 4GB instead of 8GB stick.

Do all 4 sticks of RAM have to be the same?

Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency. … You can use 1 stick of RAM in a dual channel motherboard but it won’t be running in dual channel mode, only single channel.

Where do I put the ram in 4 slots?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Can you use two different brands of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Does RAM have to be in first slot?

If you are using SDRAM or single-channel DDR-SDRAM, then it usually doesn’t matter which modules go into which slots. But a few motherboards require that you start with the first slot and fill them in order, so you may as well do it that way.

How do I know if my RAM slot is bad?

Try testing each memory module in each of the memory slots to find if one of the slots is faulty. To fix a faulty slot you would need to replace your motherboard. When replacing a module, make sure the indention on the bottom is lined up correctly with the slot and then press it in until you hear the levers snap.

Should I upgrade my RAM from 4gb to 8gb?

In general, we recommend at least 4GB of RAM and think that most users will do well with 8GB. Choose 16GB or more if you’re a power user, if you run today’s most demanding games and applications, or if you simply want to make sure you’re covered for any future needs.

Can I use 2 4gb and 1 8gb RAM?

Simple answer is. If you have only 2 Dimm or ram slots in your motherboard then one 8gb ram would be good. If you have more than 2 then 2*8gb ram would be good.

How do I increase my RAM slots?

Hi there, referring to your question “RAM slots” can’t be increased. They are soldered into the motherboard. The slots refer to the part of your computer where you install extra RAM module or insert another (probably a bigger one) module.

What happens if I put RAM in wrong slots?

If you have two sticks of ram and two slots there is no such thing as a “wrong slot”. If you have 4 memory slots and you put your two sticks in the wrong slot (assuming it boots) then it will just run at lower performance then it could and windows would be oblivious to this.

Does it matter which DIMM slot I put my ram in?

The DIMM slots for your RAM are usually right next to your CPU. … Now, logic would suggest that those with two sticks of RAM to install should put them in slots 1 and 3. But listening to logic is silly when building a PC, because most motherboards will probably tell you you need to put them in slots 2 and 4 instead.